After some considerations I decided to remove the entire insulation for better access to the airframe. This makes it easier to remove remaining wires, tubes and other unnecessary equipment. I am still missing the footrest brackets, panel brackets and panel hinges which I will have to re manufacture.
Author Archives: commander
18
Jan
Jan
D-ABUD/N707QJ is undergoing a thorough cleaning and removal of insulation, wiring and unnecessary tubes. Kitchen cleaner is probably the best cleaning product to use for this job. Note the large amounts of nicotine which were not that easy to remove and required some extensive rubbing.
17
Dec
Dec
Control coloums removed, Foot rest removed, wirring removed, Panel brackets removed, cockpit floor wire duct removed.
17
Dec
Dec
EPR, N1, EGT and N2 are ready! Tested and found ok. Flap indicators on the right are completed too.
17
Dec
Dec
Kollsman Altimeter has been a major challenge. I used a broken spare unit to test a stepper motor on it. The axis for the QNH setting needs to be lengthened to turn a potentiometer. The white flag on the altimeter scale for the KIFIS system can be biased out of view with a fixed voltage. […]